The Wired WiFi PTLevel

A weather-resistant liquid level monitor that requires power and a WiFi signal at the tank. Log into the free iOS or Android app, or ptdevices.com, to view your level history, set up SMS and email alerts, change your tank settings, share with your water delivery company, and more.

Additional Features

  • Simple WiFi Connectivity – Connect the PTLevel to your home WiFi signal in a few minutes via the IOS or Android App.
  • Weather Resistant Design – Install it outside with peace of mind.
  • Plugged In -Powered by a low voltage extendable IPP44 power supply.
 
Easy Fast Installation
  • Plug in the Device – Use the supplied power supply (240cm/7.9ft long water proof wire included), run a low voltage wire, or use a basic POE power injector to power the PTLevel without the worry of managing batteries.

    The provided wire can be extended easily if needed. The main thing is that you have a good WiFi signal at the location of the PTLevel installation.

  • Connect the WiFi – Next, using the simple WiFi connection setup, get the PTLevel connected to the internet via your WiFi connection.
    A step by step guide is provided with the included full color manual. Or use the IOS or Android App to connect to and monitor your PTLevel data.

  • Install the PTLevel – Lastly, install the PTLevel on the tank and lower the pressure chamber in the liquid.
    You can screw down the PTLevel optionally and you’ll simply need to drill a small hole (6mm/1/4in) for the tubing run into the tank. It is ok to install the PTLevel outside but you must make sure it doesn’t get submersed.