Product Catalog

Created on May 23, 2025

Dock

SKU / Product Name / Description	Image
12967488900 SS Boating Ladder $75.00
16935888900 SS CABLE ASSEM 4 CUBES $63.75
776113962633 776113962633 HD ALUMINUM DOCK $41.99 HD ALUMINUM DOCK LITE Light up your dock, deck or pathways with this attractive, matte finish high-intensity aluminum Solar Dock Lite. Corrosion resistant aluminumBright white LEDsTraffic tolerant, toe friendly designRechargeable batteriesIP 65 Waterproof Rating
8500-R-47875 TITAN DECK BOARD 4 FT. MUSHROO $83.45 TITAN Deck Board 4 ft. Mushroom Reinforced
8800-T-3600 TITAN DECK BOARD 3 FT MUSHROOM $49.75 TITAN Deck Board 3 ft Mushroom Non Reinforced
C01-000002-U CUBE G2 BEIGE $80.80 CUBE G2 BEIGE The Candock modular floating system is a truly revolutionary product! The era of massive wooden, metal and cement docks is over. Our high-quality plastic system is guaranteed for 20 years; it?s environmentally friendly and requires no maintenance. Easy to use and reliable, it provides unlimited configuration and application options. The Candock modular floating system has become a must for residential, commercial, marina and recreational facility docks or any other application. When compared to wooden, metal or cement docks, its advantages are crystal clear: just consider its exceptional lifespan and its high resistance to the most severe weather conditions.
C01-000004-U CONNECTING PIN G2 BEIGE $13.45 CONNECTING PIN G2 BEIGE The G2 connecting pin is the masterpiece holding the cubes together. Our connecting pin is designed to be combined with a sliding nut that slides over the cubes tabs, this way giving the whole structure a superior resistance; better than any other similar type of dock modular floating dock systems on the market. (boxes of 25)
C01-000007-U CUBE G2 LOW PROFILE BEIGE $83.60 CUBE G2 LOW PROFILE BEIGE The low profile cube is a basic unit that can be used to construct an installation. It is mainly used to accommodate rowboats such as canoes and kayaks. Its edge being closer to the waterline greatly facilitates boarding.
C01-000011-U CUBE G2 CORNER BEIGE $78.35 CUBE G2 CORNER BEIGE The corner cube is specifically designed to improve the overall aesthetic as well as the stiffness at a junction of 2 perpendicular sections. It can also be used to create octagonal forms or to create a 45-degree angle dock. It can also be used with the low profile cubes.
C01-000013 CUBE EDGE BEIGE $75.00
C01-000015 CUBE EDGE CORNER BEIGE $60.70
C01-000017-U SLIDING NUT BLACK $3.25 SLIDING NUT BLACK Sliding nut that goes over one of the ears of our cubes and connects to the connecting pin to form a structure. (boxes of 105)
C01-000018-U NUT CANDOCK WHITE $3.25 NUT CANDOCK WHITE The nut is connected with the exterior lug connector to form a structure. (boxes of 125)
C01-000020-U SPACER CANDOCK GRAY $2.55 SPACER CANDOCK GRAY Candock?s cubes are equipped with 4 ears, positionned at various heights. Due to the space created between them, the spacer will be used to fill this empty space. Spacers are mainly used for the Jetslide?s assembly. (boxes of 225)
C01-000022-U EXTERIOR LUG CONNECTOR CANDOCK $7.40 EXTERIOR LUG CONNECTOR CANDOCK WHITE This bolt is used to increase the overall resistance of the dock. All Candock systems need to include EXTERIOR LUG CONNECTORS and WHITE NUTS on their perimeter.
C01-000023 SERVICE CUBES G2 BLACK $57.55
C02-000001-U EXTERIOR LUG CONNECTOR JETSLID $10.90 EXTERIOR LUG CONNECTOR JETSLIDE This lug is used to fix the back tabs of cubes or corner cubes at the end of a jetslide.
C02-000002 Connecting pins – Long type $19.15
C02-000015-U JETSLIDE G2 BEIGE $1542.40 JETSLIDE G2 BEIGE The Jetslide is a dry dock that can be combined to our cubes to form a complete system. This system allows you to dry dock your boat without the need of mechanic aid. You simply need to drive your boat on the Jetslide using the boat?s energy. The Jetslide is larger and therefore can better support your boat. In addition, it will support your boat on all its length on a 6¨ surface on each side. Other systems will only support the weight of your boat in the center or on the corners of a cube which exercises pressure on the hull. The Jetslide system offers you superior buoyancy; ensurring that your boat will be as far as possible from the water surface compared with many other systems where your boat is directly in contact with water or very near the surface line. As a standard feature, Candock also offers you a larger space to move around your boat. The enterance point of our system is at water level; this will eliminate all forms of impact with your boat contrary to a system with rollers that deteriorate rapidly under repetitive impacts, or regular cubes that will tear and get full of water rendering the system completely unusable.
C02-000020-U JETSLIDE EXTENSION PLATE 3 CUB $471.95 JETSLIDE EXTENSION PLATE 3 CUBES The safety plate is a product that allows the Jetslide system to adapt to intermediate lengths of watercrafts without the use of an extra Jetslide. The installation requires Jetslide lugs and sliding nuts.
C02-000024 LINK KIT FOR JETROLL $138.10
C02-000032-U STIFFENING BEAM FOR JETSLIDE S $347.75 STIFFENING BEAM FOR JETSLIDE SYSTEM 115FTFT / 6 CUBES (HARDWARE KIT INCLUDED- B0302) Stabilizing bar to be used with the Jetslide system in order to evenly distribute the total weight of your boat ensuring optimal floating conditions. This 117¨ (2,97 m) bar should be used with 2 rows of cubes on each side.
C02-000035 Jetroll – Including 1 bow stop and 12 wheels kit – Beige $2999.00
C03-000003-U PERIPHERAL POST HANDRAIL BEIGE $84.55 PERIPHERAL POST HANDRAIL BEIGE (INCLUDES 4 SPACERS, 1 WHITE NUT AND 1 STRENGTHENING SPACER) Our new and improved handrail system is now beneficiating of from the same characteristics as the rest of our product range. Made with the highest quality HDPE resin available, these posts are the most reliable on the market. Available in 2 separate models, the surface model or the peripheral model, the posts can
C03-000007-U CLEAT CANDOCK WHITE (WHITE NUT $14.90 CLEAT CANDOCK WHITE (WHITE NUT INCLUDED) Cleat used to anchor your boat to the dock. We recommend using a cleat for each 10? (3 m) length. For example: a 25? (8 m) long boat = use 3 cleats. Our docks move all the time, as does your boat, thus avoiding any unnecessary tension on the cleats. However, when you expect severe weather conditions, we recommend to tie it directly to the ears or pass it through the exterior lug connector. Our cleats are made of highly resistant plastic but less resistant than metal ones can be. (boxes of 40)
C03-000008-U BUMPER WHITE (WHITE NUT INCLUD $35.00 BUMPER WHITE (WHITE NUT INCLUDED) Molded in one single unit, this product is made of a unique polyethylene resin making it soft and non-marking while allowing it to be extremely durable.
C03-000011-U BENCH G2 BEIGE $762.85 BENCH G2 BEIGE Aluminum bench with a plastic seat and back rest in a colour assorted to the dock. This product is compatible with both product lines.
C03-000013-U REVOLVING AND FOLDING BENCH G2 $413.60 REVOLVING AND FOLDING BENCH G2 A padded, pivoting and folding plastic seat. Can be removed quickly.
C03-000016 SERVICE COVER TILE BEIGE $43.00
C03-000020 Ladder G2 Beige $555.30
C04-000002-U ASSEMBLY KEY FOR NUT (RATCHET $50.40 ASSEMBLY KEY FOR NUT (RATCHET SOCKET) To be used with a ?ratchet type? wrench. We recommend using this key if you have a large quantity of nuts to install. It is also required for the installation of Candock?s ladder.
C04-000003-U ASSEMBLY WRENCH FOR NUT (MANUA $32.35 ASSEMBLY WRENCH FOR NUT (MANUAL) Aluminum key used to fix nuts in place.
C04-000007 G2 Connecting pins assembly- D $79.95
C04-000007-U ASSEMBLY KEY FOR G2 PIN (DRILL) $73.80
C05-000004 HD starting angle for welded gangway – Hardware included – Bolt-on – 4ft $513.05
C05-000017 HD PLASTIC SLIDER 4FT $47.80
C05-000024 PLASTIC DECKING 1X4 BEIGE $72.35
C05-000024-U PLASTIC DECKING 1FT X 4FT BEIGE $72.35 PLASTIC DECKING 1FT x 4FT BEIGE Premium quality non-slip openwork design plastic panel for gangways.
C05-000088 FRAME MODULAR 4FT X 12FT $1096.50
C06-000002-U CUBE G2 POST BEIGE $275.00 CUBE G2 POST BEIGE The post cube has a cylindrical opening to fit a 2 7/8¨ diameter galvanized steel pipe needed to anchor your installation. This post is also covered with a 3¨ interior diameter PVC cover and a cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7? (2,25 m).
C06-000021-U CHAIN GALVANIZED STEEL, 5/16FTFT $3.25 CHAIN GALVANIZED STEEL, 5/16FTFT, GRADE 30, /FT (comes in barrel of 550FT) Candock uses a grade 30 5/16? galvanized steel chain for its anchorages.
CS007 75 LB (34KG) CONCRETE WEIGHT $52.68 75 LB (34kg) Concrete Weight Concrete weight are used to anchor small rafts and act as tensioners on screw anchors. They have a 5/16IN chain connection and weigh approximately 45 lbs in the water.
CS021 SCREW ANCHOR $31.97 Screw Anchor Screw Anchor are threaded into the ground to hold docks and rafts in place. 36 inch long x 1/2 inch diameter x 4.5 inch flighting
CS023 SS 6FT CABLE ASSEM 3 CUBES $47.81 SS 6FT CABLE ASSEM. Cable used to connect 3 cubes wide of floating dock to the chain below. Includes 2x39IN-5/16 Cable 4-Sleeves, and Shackle.
CS024 SS EXTERIOR ANCHOR ROD $38.05 SS EXTERIOR ANCHOR ROD Exterior anchor rod allows attachement to chain or rope and fits through a white bolt. Made from 1/2 inch stainless steel.
CS029 12 FT X 32 INCHES TREATED RAMP $675.30 12 Ft x 32 Inches TREATED RAMP The treated ramp includes wheel, and is coated with a weather proofing stain
CS031 CONNECTION ASSEMB. $71.55 CONNECTION ASSEMB. Connects ramp to Candock cubes 4ft wide, (Requires 2-Connecting Pins, 4-Spacers, 2-Sliding Nuts)
CS032 CONNECTION ASSEMB. $63.55 CONNECTION ASSEMB. Connects ramp to Candock cubes 4ft wide, (Requires 2-Connecting Pins, 4-Spacers, 2-Sliding Nuts)
CS040 POST POUNDER 3IN ID $85.00 POST POUNDER 3IN ID Custom designed tool facilitating post installation.
CS051 POST REMOVER 3IN MAX $45.00 POST REMOVER 3IN MAX Custom designed tool facilitating post extraction. To be used with a jack-all.
CS052 ALUMINUM GANGWAY $1259.80 ALUMINUM GANGWAY Aluminum Ramp 16 ft long 3 ft wide built from 1 inch x 3 inch rectangular and angle aluminum.
CS053 ALUMINUM GANGWAY $0.00 ALUMINUM GANGWAY Aluminum Ramp 8 ft long 4 ft wide built from 1 inch x 3 inch rectangular and angle aluminum.
CS054 ALUMINUM GANGWAY $0.00 ALUMINUM GANGWAY Aluminum Ramp 16 ft long 3 ft wide built from 1 inch x 3 inch rectangular and angle aluminum.
CS055 WINCH (PIN MOUNTED) $185.00 Winch (Pin Mounted) Hand winch mounted to a connecting pin with 1/2 inch SS rod
CS0703 POST CAP 3IN FOR DOCK $28.44
CS098 COMBO KEY FOR PIN/SCREW ANCHOR $95.00 COMBO KEY FOR PIN/SCREW ANCHOR T wrench tool used to insert Candock connecting pin and screw anchor
CS099 KEY FOR PIN $85.00 KEY FOR PIN Key used for G2 connecting pin installation.
CS100 PRE-ASSEMBLY $0.82 PRE-ASSEMBLY Yard cost to pre-fabricate dock for ease of installation. Cost charged per item purchased.
PP278125-21096 PILE 2 7/8IN X .125 GALV $74.76 PILE 2 7/8IN X .125 GALV PVC cover and 2 7/8? fot post cube for anchorage installation.
PP278125-21126 PILE 2 7/8IN X .125 GALV $98.12 PILE 2 7/8IN X .125 GALV PVC cover and 2 7/8? fot post cube for anchorage installation.
PP278125-21156 PILE 2 7/8IN X .125 GALV $121.49 PILE 2 7/8IN X .125 GALV PVC cover and 2 7/8? fot post cube for anchorage installation.